DUOYI dy2015 Automotive car Battery Tester 24V 12V Load Tester, 100-1700CCA

DUOYI DY2015A/DY2015

12V Digital Multimeter Tools Lead Acid CCA Load Battery Charge Test Battery Teste For Vehicles Trucks Fre Shipping

If you only need to test 12v battery, you can buy DY2015, it will be cheaper and more convenient

MODEI	DY2015	DY2015A
Battery type	Lead- acid battery
Battery voltage	12V	12/24V
Battery range	100-1700CCA
Voltage range	DC 9-18V	DC 9-35V
Battery Internal Resistance	0-99mΩ
Battery Status of Health(SOH)	0-100%
Battery Status of Charge(SOC)	0-100%
Operating temperature	-18℃~50℃
Operating Language	English
Testing method	4-wire Kelvin test connection
Display Battery Internal Resistance	Display ohms
Display Battery Voltage	Display volts
Display Battery condition	Good/ok/attention/replace
Ah Input Quick Test	yes
Maximum Load Test	yes(On car)
Engine Cranking Load Test	yes
Star-up Load Test	yes
Maximum Load Test	yes
Charging system Test	yes
Display Battery Status of Health(SOH)	yes
Reverse Polarity Protection	yes
Loose Lead Detection	yes
Overload Protection	yes
Cable Length	700mm
Dimension	180*90*32mm

Selling Point:

1. Storage battery tester is used for activated style lead-acid storage battery, along with checking battery life time and the following conditions of the battery, starting up, charging, and electrical loading

2. With great design, easy operation, precise reading, complete functions, this tester supply the readings by a large LCD and hints by sound and light when testing.

3. Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data

4. Storage battery tester strengthens input protection inside , in order to prevent such situations as polar reversal connection , over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.

5. Anti-slip rubber sleeve provide a safe operate condition

6. Storage battery tester fit for all kinds of lead-acid batteries that used in equipment system associated with lead-acid battery. It is available to vehicle of 12V storage battery. The working voltage of tester is DC 9V to 35V. Do please do not check the series connection battery with the tester.

7. Standard of optional storage battery: CCA: 100-1700; IEC: 100-1000; EN:100-1700 DIN:100-1000; JIS: need to compare CCA with a table(the table is included in user manual). Generally,battery standard was marked on battery body. In case there is no mark.

Package include:

The Product Features

FOUR  MAIN  FUNCTIONS

The larger the CCA value of the battery , the internal resistance is generally smaller.

Note:

Preparation before testing - When the car is started, first turn off the fire and turn the key to the OFF position.

The standard voltage is 9.6V. The test result is more than 9.6V，the boot system is normal. (Otherwise，the boot system is abnormal.)

Note:

Preparation before testing - When the car is started, first turn off the fire and turn the key to the OFF position.

If the voltage reading is less than 12.8V (For 24V system <DY2015A>, the reading is less than 25.60V)

Please check whether the generator belt is worn and the wire is short-circuited or not .

Note: Preparation before testing - When the car is off, please start the car engine first.

If the voltage reading > 15.0V (for 24V system <DY2015A>, reading > 30.00V), please check the regulator

If the voltage reading is <13.3V (for 24V system <DY2015A>, reading > 26.60V), please check the connection point, wires and engine.

Note: Preparation before testing - When the car is off, please start the car engine first.

The Product Detail PresentationThe Product Detail Presentation